The ground-breaking Harley-Davidson CANbus controller provides plug
& play connection and intelligent control of aftermarket and genuine
Harley-Davidson accessories right from your bikes original switches or
DENALI Accessory Manager Software. Simply connect the CANsmart
Controller to your Harley-Davidson diagnostic port to access over 35
programmable accessory settings that provide intelligent control of
auxiliary lights, horns, brake lights, or any other accessory you can
imagine. The four accessory circuits are electronically fused and can
provide up to 25 peak amps (10 amps continuous).

Gen II –
More Features, More Power, More Versatile

Unlike the Gen I
CANsmart, all four circuits of the Gen II can provide a full 10 amps of
continuous power and each circuit can be configured to run any accessory
type. The maximum power draw for the whole unit remains at 30 amps
continuous. The Gen II also features two new auxiliary light settings. You
can now modulate your auxiliary lights for added conspicuity, and set your
left and right side lights to independently cancel when you activate your
corresponding turn
signal

Features:

• High/Low
  Sync- Set auxiliary lights to switch between a programmable
  high/low setting with the factory high beam switch.
• ON/OFF
  and Dim- Independently control two sets of lights ON/OFF and
  change intensity level (for both day and night) right from your original
  vehicle switches.
• Modulate Lights- Set auxiliary
  lights to modulate to increase your visibility to other
  motorists.
• Flash to Pass- Need to get someone’s
  attention? Pulse your high beam switch three times and your auxiliary
  lights will strobe three times fast.
• Cancel With Turn
  Signal- This feature cancels the corresponding auxiliary light
  when you turn your turn signal on preventing powerful auxiliary lights from
  overpowering your signal.
• Inverse Flashing With
  Hazards- This features flashes your auxiliary lights inversely to
  your hazard lights, increasing visibility during roadside
  emergencies.
• Plug & Play Horn Installation-
  Quickly and easily connect high-power aftermarket horns like our
  SoundBomb without having to add an additional harness or
  relay.
• Strobe with Horn- With this feature
  selected the CANsmart software will automatically strobe your
  auxiliary lights when you sound your horn. This feature works whether you
  have the factory horn or SoundBomb horn
  installed.
• Deceleration Activated “Smart Brake”
  Technology- The CANsmart reads vehicle speed in real-time
  to activate your auxiliary brake light during deceleration before you even
  touch the brake. You can adjust the sensitivity and minimum speed at which
  the Smart Brake Feature will activate.
• Flash Pattern
  Braking- The CANsmart provides four different flash
  patterns that make our super bright auxiliary brake lights even noticeable
  to motorists behind you. You can set auxiliary brake lights to only flash
  under hard braking, flash continuously as your brake is applied, or flash
  four times rapidly then hold steady (California legal flash
  rate).
• Circuit Function Selector-The Circuit
  Function Selector in the CANsmart software will let you run any accessory
  of your choice on any of the four circuits. Click on a circuit icon to open
  the drop-down menu and make your selection from the list of available
  circuit functions.
• Switched Power Source- The
  CANsmart provides a universal “accessory” option that simply gives
  you clean switched 12V power. That means whatever accessory you connect to
  this circuit will turn on and off with your ignition.
• Delay
  Time Out- You can also set the accessories on this circuit to have
  a delayed time out. This will keep them powered for up to 30 seconds after
  your turn off your bike.
• On Board Power- The
  “accessory” circuit option is ideal for powering your GPS, phone, heated
  gear or any other electronic device.

Whats In
The Box?

• CANsmart Controller
• (x2) 5.5ft
  Light Extension Cables
• 5ft SoundBomb Horn Extension
  Cable
• B6 Brake Light Wiring
  Adapter
• Zip-ties
• Adhesive Hook-and-Loop
  Fastener
• Micro USB Programming Cable